9秒发货/有发票 梧三标准英文版 优质技术翻译  数据库收录:159759 最近更新:2020-03-18  
支付宝/对公账号 首页   询价  购买流程  英文样品 公司简介   购物车

GB 25972-2010

标准搜索结果: 'GB 25972-2010'
标准号码内文价格(元)第2步交付天数标准名称状态
GB 25972-2010 英文版 3760 购买 现货,9秒内自动发货PDF,有增值税发票。 气体灭火系统及部件 有效

   
标准详细信息 GB 25972-2010; GB25972-2010
中文名称: 气体灭火系统及部件
英文名称: Gas fire extinguishing systems and components
行业: 国家标准
中标分类: C84
国际标准分类: 13.220.10
字数估计: 70,000
发布日期: 2011-01-10
实施日期: 2011-06-01
引用标准: GB 150; GB 5099; GB 5100; GB/T 8979; GB/T 9969; GB 18614; GB 20128; GA 61
起草单位: 公安部天津消防研究所
归口单位: 全国消防标准化技术委员会固定灭火系统分技术委员会(SAC/TC 113/SC 2)
标准依据: 国家标准批准发布公告2011年第1号(总第166号)
提出机构: 中华人民共和国公安部
发布机构: 中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
范围: 本标准规定了气体灭火系统及构成部件的术语和定义、型号编制方法、要求、试验方法、检验规则、使用说明书编写要求、灭火剂充装要求。本标准适用于七氟丙烷(HFC227ea)灭火系统、三氟甲烷(HFC23)灭火系统、惰性气体灭火系统[包括:IG01(氩气)灭火系统、IG100(氮气)灭火系统、IG55(氩气、氮气)灭火系统、IG541(氩气、氮气、二氧化碳)灭火系统]。


GB 25972-2010
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.220.10
C 84
Gas fire extinguishing systems and components
ISSUED ON. JANUARY 10, 2011
IMPLEMENTED ON. JUNE 01, 2011
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 5 
1 Scope ... 6 
2 Normative references ... 6 
3 Terms and definitions ... 7 
4 Model preparation method... 9 
5 Requirements ... 10 
6 Test methods ... 41 
7 Inspection rules ... 71 
8 Preparation requirements for instruction manual ... 78 
9 Fire extinguishing agent filling ... 78 
Appendix A (Informative) Part number preparation method ... 80 
Appendix B (Informative) Fire extinguishing concentration for category B n-
heptane fire and category A wood pile surface fire ... 82 
Appendix C (Informative) Test method for fire extinguishing concentrations for
putting out category B n-heptane fires and category A wood pile surface fires
... 83 
Appendix D (Normative) System test procedure and sample quantity ... 89 
Appendix E (Normative) Test procedure and sample quantity for fire
extinguishing agent cylinder group ... 90 
Appendix F (Normative) Test procedure and sample quantity for driving gas
cylinder group ... 92 
Appendix G (Normative) Container test procedure and sample quantity ... 93 
Appendix H (Normative) Container valve test procedure and sample quantity
... 94 
Appendix I (Normative) Nozzle test procedure and sample quantity ... 96 
Appendix J (Normative) Selection valve test procedure and sample quantity 98 
Appendix K (Normative) One-way valve test procedure and sample number
... 100 
Appendix L (Normative) Header pipe test procedure and sample quantity .. 102 
Appendix M (Normative) Connection pipe test procedure and sample quantity
... 103 
Appendix N (Normative) Safety venting device test procedure and sample
quantity ... 104 
Appendix P (Normative) Drive device test procedure and sample quantity.. 106 
Appendix Q (Normative) Control panel test procedure and sample quantity 107 
Appendix R (Normative) Weighing device test procedure and sample quantity
... 108 
Appendix S (Normative) Pressure display test procedure and sample quantity
... 109 
Appendix T (Normative) Level measuring device test procedure and sample
quantity ... 111 
Appendix U (Normative) Signal feedback device test procedure and sample
quantity ... 112 
Appendix V (Normative) Pipeline, fitting test procedure and sample quantity
... 114 
Appendix W (Normative) Hook, bracket test procedure and sample quantity
... 115 
Appendix Y (Normative) Decompression device test procedure and sample
quantity ... 116 
Appendix Z (Normative) Low venting high close valve test procedure and
sample quantity ... 117 
Gas fire extinguishing systems and components
1 Scope
This standard specifies the terms and definitions, the method of formulating the
model, the requirements, the test method, the inspection rules, the
requirements for the preparation of the operating instructions, and the fire
its components.
This standard applies to heptafluoropropane (HFC227ea) fire extinguishing
system, trifluoromethane (HFC23) fire extinguishing system, inert gas fire
extinguishing system [including. lG01 (argon) fire extinguishing system, lG100
(nitrogen) fire extinguishing system, IG55 (argon, nitrogen) fire extinguishing
system, IG541 (argon, nitrogen, and carbon dioxide) fire extinguishing system.
2 Normative references
The provisions in following documents become the provisions of this standard
through reference in this standard. For the dated references, the subsequent
however, parties who reach an agreement based on this standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB 150 Steel pressure vessels
GB 5099 Seamless steel gas cylinder (GB 5099-1994, neq ISO 4705.1983)
GB 5100 Welded steel gas cylinders (GB 5100-1994, neq ISO 4706.1989)
GB/T 8979 Pure nitrogen and high purity nitrogen and ultra-pure nitrogen
GB/T 9969 General principles for preparation of instructions for use of
industrial products
GB 20128 Inert fire extinguishing agent (GB 20128-2006, ISO 14520.2005,
NEQ)
GA 61 General technical specifications of actuating and control devices of
fixed extinguishing systems
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
System working pressure
Pressure at the outlet of the fire extinguishing agent cylinder group container
Note. If the container valve on the fire extinguishing agent cylinder group
does not have a decompression function, the working pressure of the system
is the working pressure of the cylinder group.
If the container valve on the fire extinguishing agent cylinder group has a
decompression function, the working pressure of the system is the pressure
at the outlet of the container valve after decompression.
3.2
Filling density
The ratio of the mass of the fire extinguishing agent in the storage container
3.3
Compressed inert gaseous fire extinguishing system
The fire extinguishing system in which the fire extinguishing agent in the
extinguishing agent cylinder group is delivered by its own pressure.
3.4
Stored pressure gaseous fire extinguishing system
The fire extinguishing system in which the fire extinguishing agent is
pressurized and stored in the cylinder group with inert gas, and the fire
extinguishing agent in the cylinder group is delivered by the pressurized gas
3.5
Storage pressure
For a compressed inert gaseous fire extinguishing system, it refers to the
equilibrium pressure in an environment of +20 °C of the filled fire
other components.
5.1.2.3 All parts of the same system shall be fixed firmly and connected reliably,
the parts are installed in the correct position, the overall layout is reasonable,
and it is easy to operate, check and maintain.
5.1.2.4 The specifications of the same functional components in the system
density or filling pressure of each fire extinguishing agent storage container
shall be the same.
5.1.3 Appearance
5.1.3.1 The components of the system shall be free from obvious processing
defects or mechanical damage. The external surfaces of the components shall
be subject to anti-corrosion treatment. The anti-corrosion coating and plating
shall be complete and uniform.
5.1.3.2 The name of the fire extinguishing agent shall be marked on the
extinguishing agent storage container, the handwriting shall be clear and legible.
5.1.3.3 Each manually operated part of the system shall be marked with text
and graphic symbols to indicate the operation method.
5.1.3.4 The system nameplate shall be firmly set on the obvious part of the
system, indicating. system name, model specification, implemented standard
code, fire extinguishing agent filling total mass, working temperature range,
production unit, product number, exit-factory date, etc.
5.1.3.5 The system warning sign shall be firmly set in the obvious part of the
system. The content of the warning sign for the inert gas fire extinguishing
system is that “The nozzle will emit high-pressure gas when the system is in
trifluoromethane extinguishing system, the content of the warning sign is that
“The system will decompose and produce a certain amount of hydrogen fluoride
gas when it extinguishes fire”. The contents of the warning sign shall be clearly
readable under the general lighting conditions at a distance of 3 m from the sign.
5.1.4 System quasi-working status
The working positions of the operating parts of the system, the control and
monitoring functions of the control panel shall all be in the normal quasi-working
state; the leak detection devices of each cylinder group shall be in normal
working condition, and the filling mass of the medium in the cylinder group
group shall not be loose, fall off or damaged. After the test, the air tightness of
the fire extinguishing agent cylinder group shall comply with the provisions of
5.2.4, the container valve shall be able to open normally in case of automatic
and manual startup.
5.2.9 Siphon
For fire extinguishing agent cylinder group with siphons, the siphon shall be
made of a metal material that can resist corrosion by the fire extinguishing agent.
5.2.10 Incorrect discharge protection device
The fire extinguishing agent cylinder group shall have a protective device at the
extinguishing agent during the transportation, loading and unloading, and
storage. The opening on the protective device shall enable the fire extinguishing
agent to be uniformly sprayed without generating excessive recoil force. And
shall not be charged out.
5.2.11 Gas sampling requirements
Fire extinguishing agent cylinder group (on container or container valve) shall
be equipped with fire extinguishing agent sampling port, and the fire
extinguishing agent shall be able to be drawn from the cylinder group without
opening the container valve or fully opening the container valve (it can still be
5.2.12 Fire extinguishing agent release time
At the maximum filling density or filling pressure of the fire extinguishing agent
cylinder group, the discharge time of the fire extinguishing agent from the
container valve shall be not more than 80% of the system discharge time as
specified in 5.1.1.3.
5.2.13 Fire extinguishing agents and pressurized gas requirements
Heptafluoropropane fire extinguishing agent shall meet the requirements of GB
18614.
The inert gas extinguishing agent shall meet the requirements of GB 20128.
security department of the State Council.
The pressurized gas shall be pure nitrogen and shall meet the requirements of
GB/T 8979.
5.2.14 Signs
5.5.10.1 Salt spray corrosion resistance
The salt spray corrosion test shall be carried out in accordance with the method
specified in 6.9, the container valve and its accessories shall not have obvious
corrosion damage. After the test, the sealing performance of the container valve
shall comply with the provisions of 5.5.5. When the working reliability is tested
   
宁德梧三商贸有限公司 | 纳税人识别号:91350900MA32WE2Q2X | 营业执照:营业执照证书
点击联络我们 联系电邮郑文锐销售经理: Sales@gb-gbt.cn | Sales@ChineseStandard.net | 电话郑经理: 18059327808 | 增值税普通发票 / 增值税专用发票样品
对公开户银行:中国建设银行古田支行 | 账户名称:宁德梧三商贸有限公司 | 账号:35050168730700000955 对公银行账号证书
翻译支持:全资母公司新加坡场测亚洲公司(https://www.ChineseStandard.net 卖欧美后再内销)
网站备案许可:闽ICP备19012676号 http://www.beian.miit.gov.cn
隐私   ·  优质产品   ·  退款政策   ·  公平交易   ·  关于我们