9秒发货/有发票 梧三标准英文版 优质技术翻译  数据库收录:159759 最近更新:2020-03-18  
支付宝/对公账号 首页   询价  购买流程  英文样品 公司简介   购物车

GB 50033-2013

标准搜索结果: 'GB 50033-2013'
标准号码内文价格(元)第2步交付天数标准名称状态
GB 50033-2013 英文版 345 购买 现货,9秒内自动发货PDF,有增值税发票。 建筑采光设计标准(附条文说明) 有效

   
标准详细信息 GB 50033-2013; GB50033-2013
中文名称: 建筑采光设计标准(附条文说明)
英文名称: Standard for daylighting design of buildings
行业: 国家标准
中标分类: P31
国际标准分类: 91.120.01
字数估计: 107,000
旧标准 (被替代): GB/T 50033-2001
引用标准: GB/T 5699
起草单位: 中国建筑科学研究院
归口单位: 中国建筑科学研究院
标准依据: 住房和城乡建设部公告第1607号
范围: 本标准适用于利用天然采光的民用建筑和工业建筑的新建、改建和扩建工程的采光设计。


UDC
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
P GB 50033-2013
Standard for Daylighting Design of
Buildings
建筑采光设计标准
ISSUED ON. DECEMBER 25, 2012
IMPLEMENTED ON. MAY 1, 2013
Jointly issued by the Ministry of Housing and Urban-Rural Development
(MHURD) and the General Administration of Quality
Supervision, Inspection and Quarantine (AQSIQ) of the
People's Republic of China
GB
IForeword
According to the requirements of Documents Jian Biao [2009] No.88 issued by Ministry
of Housing and Urban-Rural Development - "Notice on Printing and Publishing the
Development and Revision Plan of National Engineering Construction Standards in 2009",
this Standard was revised from the former standard of "Standard for Daylighting Design of
Buildings" by China Institute of Building Standard Design & Research jointly with all the
organizations concerned.
During the process of developing this Standard, the development team examined and
finalized it based on extensively soliciting for opinions by investigation and study, simulating
calculation, experimental verification, earnestly summarizing the practical experiences and
making reference to the relevant international standards and foreign advanced standards.
This standard comprises seven chapters and five appendices and the main technical
content includes general principles, terms and symbols, basic requirements, standard value for
daylight, daylighting quality, daylighting calculation and daylighting energy efficiency.
The main technical contents of this revision are.
1. The minimum daylighting factor side daylighting evaluation index was changed to
average daylighting coefficient; critical illumination value of indoors natural light was
changed to design illuminance value of indoor natural light.
2. The application scope the Standard was expanded, and the standard value for
daylighting of exhibition building, traffic building and sports building were added.
3. Calculation method corresponding to average daylighting factorwas given.
4. The chapter "daylighting energy efficiency" was newly-added and the calculation
method of daylighting energy efficiency was specified.
The provisions printed in bold type in this Standard are compulsory and must be
enforced strictly.
Ministry of Housing and Urban-Rural Development is in charge of the administration of
this standard and the explanation of the compulsory provisions. China Academy of Building
Research is responsible for the explanation of specific technical contents. During the process
of implementing this standard, the relevant opinions and advice, whenever necessary, can be
posted or passed on to Architecture Environment and Energy Efficiency Institute China
Academy of Building Research (address. No. 30, North 3rd Ring East Road, Beijing, China,
100013).
Chief development organization. China Academy of Building Research
Participating development organization of this Standard.
China Architecture Design and Research Group
Beijing Institute of Architectural Design Co., Ltd.
Tsinghua University
China Academy of Urban Planning & Design
China Aviation Planning and Construction Development Co., Ltd.
Shanghai Planning, and Land Resources Administration Bureau
Suzhou Solatube Daylight Technology Co.,Ltd.
Beijing Kebohua Building Materials Co., Ltd.
Contents
Foreword ... I
1 General Provisions ... 1
2 Terms and Symbols ... 1
2.1 Terms ... 1
2.2 Symbols ... 2
3 Basic Requirements ... 4
4 Standard Value for Daylight ... 5
5 Daylighting Quality ... 12
6 Daylighting Calculation... 13
7 Daylighting Energy Saving ... 17
Appendix A Daylight Climate Zone of China ... 19
Appendix B Discomfort Glare of Window... 22
Appendix C Daylighting Calculation Method... 23
Appendix E Daylighting Energy Saving Calculation Parameters ... 38
Explanation of Wording in This Code ... 39
List of Quoted Standards ... 40
11 General Provisions
1.0.1 This Standard was formulated with a view to implement national laws and regulations
and technical and economic policies, fully utilize natural light, create good light environment,
save energy, protect environment and construct green building in the architectural lighting
design.
1.0.2 This Standard is applicable to the daylighting design of constructed, renovated and
1.0.3 The architectural lighting design shall be technology-advanced, economically
reasonable and in favor of visual work and physical and mental health.
1.0.4 Architectural lighting design shall not only comply with this Standard but also comply
with those in the current relevant ones of the nation.
2 Terms and Symbols
2.1 Terms
2.1.1 Reference surface
It refers to the faces measured or with specified illuminance
2.1.2 Illuminance
onto the surface element (including this point) divided by the area of this surface element.
2.1.3 Exterior illuminance
It refers to the illuminance on the exterior horizontal plane without shading under the
irradiation of the diffused light from the sky.
2.1.4 Interior illuminance
It refers to the illuminance at a point of the interior horizontal plane under the irradiation
of the diffused light from the sky.
2.1.5 Daylight factor
It is the ratio of illuminance generated from receiving the diffuse sky radiation light
sky radiation illuminance generated on the external horizontal plane without shading from the
sky half.
2.1.6 Standard value of daylight factor
It is the daylighting effient value where the visual function requirements are met under
the specified exterior natural light design illuminance.
2.1.7 Design illuminance of exterior daylight
The minimum illuminance of exterior natural light with only natural light utilized.
2.1.8 Standard value of interior daylight illumlnance
It correspond to the specified exterior natural light design illuminance value and the
efficient.
2.1.9 Daylight climate
2 It refers to the natural light status formed by vertical incident solar rays, diffuse sky
radiation light and ground-reflected light
2.1.10 Annual average total illuminance
It refers to the total illumination of exterior natural light according to statistics in
specified annual time.
2.1.11 Daylight climate coefficient
Zone factordetermined by the average total illumination value according to the daylight
2.1.12 Critical illuminance of exterior daylight
It refers to the exterior natural illumination where all the artificial lighting are required to
be opened indoors.
2.1.13 Uniformity of daylighting
It refers to the ratio of minimum daylighting factorvalue and the mean value for
reference planes.
2.1.14 Discomfort glare
Uncomfortable visual conditions are caused due to the unsuitable distribution of
lightness and the existence of extreme brightness contrast in space and time in the field of
in particular.
2.1.15 Ratio of glazing to floor area
It refers to the ratio between the window opening area and ground ara. As for the side
daylighting, the window opening area above the reference planes shall be adopted.
2.1.16 Depth of daylighting zone
It refers to the depth of the room meeting the daylighting requirements in side
daylighting. In this Standard, it is expressed with the ratio of room depth and the height from
the reference planes to the win...
   
宁德梧三商贸有限公司 | 纳税人识别号:91350900MA32WE2Q2X | 营业执照:营业执照证书
点击联络我们 联系电邮郑文锐销售经理: Sales@gb-gbt.cn | Sales@ChineseStandard.net | 电话郑经理: 18059327808 | 增值税普通发票 / 增值税专用发票样品
对公开户银行:中国建设银行古田支行 | 账户名称:宁德梧三商贸有限公司 | 账号:35050168730700000955 对公银行账号证书
翻译支持:全资母公司新加坡场测亚洲公司(https://www.ChineseStandard.net 卖欧美后再内销)
网站备案许可:闽ICP备19012676号 http://www.beian.miit.gov.cn
隐私   ·  优质产品   ·  退款政策   ·  公平交易   ·  关于我们