9秒发货/有发票 梧三标准英文版 优质技术翻译  数据库收录:159759 最近更新:2020-01-27  
支付宝/对公账号 首页   询价  购买流程  英文样品 公司简介   购物车

QC/T 15-1992

标准搜索结果: 'QC/T 15-1992'
标准号码内文价格(元)第2步交付天数标准名称状态
QC/T 15-1992 英文版 810 购买 现货,9秒内自动发货PDF,有增值税发票。 汽车塑料制品通用试验方法 有效

   
标准详细信息 QC/T 15-1992; QC/T15-1992; QCT 15-1992; QCT15-1992
中文名称: 汽车塑料制品通用试验方法
英文名称: (Common test methods for automotive plastics)
行业: 汽车行业标准 (推荐)
中标分类: T05
字数估计: 21,000
发布日期: 21/5/1992
实施日期: 1/6/1993
引用标准: GB 209; GB 252; GB 435; GB 484; GB 534; GB 2918; GB 5671; JB 3979; QC/T 17; SY 4005
采用标准: JASO M312-85, EQV
起草单位: 长春汽车材料研究所
归口单位: 全国汽车标准化技术委员会
标准依据: 发改办工业(2005)743号
范围: 本标准规定了汽车用塑料成型制品(以下简称制品)性能的通用试验方法。本标准适用于汽车用各种塑料制品, 但不适用于发泡制品、座垫、电镀制品、涂装制品。


QC/T 15-92
QC
AUTOMOTIVE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
T 05
General test methods for
automotive plastic products
汽车塑料制品通用试验方法
ISSUED ON. MAY 21, 1992
IMPLEMENTED ON. JUNE 1, 1993
Issued by. China Automotive Industry Corporation
Table of Contents
1 Subject contents and application scope ... 3 
2 Normative references ... 3 
3 Test items ... 3 
4 General test conditions ... 4 
5 Test methods ... 5 
6 Evaluation items ... 24 
7 Test report ... 26 
Additional explanations. ... 26 
General test methods for automotive plastic products
1 Subject contents and application scope
This Standard specifies the general test methods for automobile plastic molding products
(hereinafter referred as products).
This Standard is applicable to automobile plastic products but not to foaming products,
seats, electroplated products and coating products.
2 Normative references
GB 209 Sodium hydroxide for industrial use
GB 252 General diesel fuels
GB 435 Gasoline engine oil
GB 484 Vehicle used gasoline
GB 534 Industrial sulfuric acid
GB 2918 Plastics – Standard atmospheres for conditioning and testing
GB 5671 Lithium base grease for general purpose automobile
JB 3979 Test methods for automobile steering-wheel
QC/T 17 General rules for automative part weathering test
SY 4005 No.4604 synthetic brake oil
3 Test items
Test items include the 11 items as follows.
a. temperature resistance test;
b. weathering resistance test;
c. water resisting test;
d. wet resistance test;
e. chemical reagents resistance test;
f. vibration resistance test;
g. impact resistance test;
h. wear resistance test;
i. scratch resistance test;
j. rigidity test;
k. comprehensive test.
4 General test conditions
4.1 Standard environment conditions
The standard environment conditions are prescribed in GB 2918.
4.2 Specimen
The product which has been assembled and available for use can be used in a test as the
specimen. However, test piece which is simulative to the state of the product that is
actually used in an automobile can also be used if not affecting the properties of product.
4.3 Pre-treatment of specimen
The specimen, randomly selected from the products which have been placed for at least
24h since manufacturing, cannot undergo a test until being placed in the environmental
conditions as stipulated in 4.1 for no less than 4h or in other conditions agreed by supplier
and buyer if required.
4.4 Quantity of specimen
Unless otherwise specified, the quantity of specimen shall be in accordance with Table 1.
Table 1
Test purpose Quantity of specimen
Qualitative test At least 3
Quantitative test At least 5
the specimen submerged;
e. In principle, when the specimen is taken out from different environments for each
5.2 Weathering test
Weathering test shall be carried out in accordance with QC/T 17.
5.3 Water resisting test
Water resisting test is to examine the variation of product in water absorption when
directly contacting water during use.
Submerge the specimen which has been pre-treated in the standard environment as
stipulated in article 4.1 in the constant temperature test bath at 40±1°C or actually working
temperature for at least 200h. Take it out and wipe it clean with dry cleaning cloth. Then
put it in the standard environment for cooling for 1h. Conduct the inspection to the
be >105Ω deionized water.
5.4 Wet resistance test
Wet resistance test is to examine the variation of product brought by moisture absorption.
5.4.1 Classification of test
Tests are classified into 3 types as shown in Table 8 according to the environmental
impact to the product.
Table 8
Test conditions
Test classification
°C
Relative
humidity % Applicable scope
Type 1 70±2 Above 90 The product exposed at high temperature and high humidity conditions
Type 2 55±1 Above 95 General product Type 3 40±1 Above 90
5.4.2 Test methods
Pre-treat the specimen according to 4.3; then put it in the constant temperature and
humidity chamber as stipulated in article 8 for at least 96h. Take it out and wipe it clean
with the dry cleaning cloth. Put in the standard environment as stipulated in 4.1 for cooling
5.5 Chemical medium resistance test
stipulated in Table 11. Examine the specimen according to the items as stipulated in
article 6.
Table 11
SN Cleaning method Drying method The placing time after drying (h)
1, 2, 3, 4, 8, 9, 10 Remove oil dirt with petroleum ether
Dry for 10 ~ 20min at 50°C or
lower constant temperature
chamber 1 5, 6, 7 Remove dirt with ethyl alcohol
Dry for 2 ~ 3h at 50°C or lower
constant temperature chamber
5.5.3.3 Dropping test
a. Dropping test at room temperature
Use injector or gauze to spread the chemical medium as stipulated in Table 10 on
the surface of specimen at the standard environment. Place it for the prescribed
time duration; treat the specimen according to the method as stipulated in Table 11.
Examine the specimen according to the items as stipulated in article 6.
b. High temperature dropping test
the surface of specimen at the standard environment. Place it for the prescribed
time duration at the temperature as agreed by supplier and buyer. Cool it to room
temperature; treat the specimen according to the method as stipulated in Table 11.
Examine the specimen according to the items as stipulated in article 6.
5.6 Vibration resistance test
The purpose of this test is to examine the vibration resistance of product.
5.6.1 Classification of test
a. Resonance point determination test
Determine the resonance frequency and accelerated velocity of product which is
b. Vibration endurance test
Examine the endurance of product to vibration.
5.6.2 Classification of vibration conditions.
The classification of vibration conditions is prescribed as follows.
5.6.2.1 The vibration conditions of specimen are classified into the following 4 types
according to the category of vehicle mounted with the product.
Type 1. car series mainly
Type 2. passenger car series mainly
Type 3. truck series mainly
5.6.2.2 The vibration conditions of specimen are classified into the following 4 types
according to the place of product installed on a vehicle.
Type A. mounted on vehicle body or the position at the upper side of chassis spring
with less vibration
Type B. mounted on vehicle body or the position at the upper side of chassis spring
with more vibration
Type C. mounted on the part of engine with less vibration
Type D. mounted on the part of engine with more vibration
5.6.3 Test conditions
Firstly carry out resonance point determination test and then endurance test.
5.6.3.2 Specimen installation
The specimen which is close to use state is mounted on the vibration stand.
5.6.3.3 Vibration application method
Simple harmonic vibration in the up-to-down, left-to-right or back-to-forward quadrature
direction relative to the installation mode of specimen is applied successively but the
harmonic ratio of simple harmonic vibration should be 25% or less of vibration accelerated
velocity in principle.
5.6.3.4 Test temperature
5.6.4 Test methods
5.6.4.1 Resonance point determination test
Table 13
Harm
onic
Frequency
Hz
Vibration
Acceleration
Category 1 Category 2 Category 3 Category 4
A B C D A B C D A B C D A B C D
2 33 or 67 22 ○ ○
3 33 or 67 32 ○ ○ ○ ○
4 33 or 67 43 ○ ○ ○ ○ ○
7 33 or 67 67 ○ ○ ○ ○ ○
9 33, 67or 133 87 ○ ○ ○ ○
11 67 or 167 111 ○
Table 14
Vibration
Acceleration
m/s2
Vibration time h
Up and down Left and right Front and back
2 33 or 67 22 4 2 2
3 33 or 67 32 4 2 2
4 33 or 67 43 4 2 2
7 33 or 67 67 4 2 2
11 67 or 167 111 4 2 2
5.7.2 Tests temperature
Tests temperature shall, as specified by Table 15, select one temperature in the table to
conduct the tests.
Table 15
The classification of temperature Tests temperature °C
A Standard temperature 23±5
B 0±2
C -40±2
   
宁德梧三商贸有限公司 | 纳税人识别号:91350900MA32WE2Q2X | 营业执照:营业执照证书
点击联络我们 联系电邮郑文锐销售经理: Sales@gb-gbt.cn | Sales@ChineseStandard.net | 电话郑经理: 18059327808 | 增值税普通发票 / 增值税专用发票样品
对公开户银行:中国建设银行古田支行 | 账户名称:宁德梧三商贸有限公司 | 账号:35050168730700000955 对公银行账号证书
翻译支持:全资母公司新加坡场测亚洲公司(https://www.ChineseStandard.net 卖欧美后再内销)
网站备案许可:闽ICP备19012676号
隐私   ·  优质产品   ·  退款政策   ·  公平交易   ·  关于我们