9秒发货/有发票 梧三标准英文版 优质技术翻译  数据库收录:159759 最近更新:2020-03-11  
支付宝/对公账号 首页   询价  购买流程  英文样品 公司简介   购物车

QC/T 746-2006

标准搜索结果: 'QC/T 746-2006'
标准号码内文价格(元)第2步交付天数标准名称状态
QC/T 746-2006 英文版 580 购买 现货,9秒内自动发货PDF,有增值税发票。 压缩天然气汽车高压管路 有效

   
标准详细信息 QC/T 746-2006; QC/T746-2006; QCT 746-2006; QCT746-2006
中文名称: 压缩天然气汽车高压管路
英文名称: High pressure pipelines for compressed natural vehicles
行业: 汽车行业标准 (推荐)
中标分类: T32
国际标准分类: 43.040.99
字数估计: 16,000
发布日期: 2006-03-07
实施日期: 2006-08-01
引用标准: GB/T 528; GB/T 3765; GB/T 5563; GB/T 5564; GB/T 9571; GB/T 9576; GB/T 9577; GB 9969.1; GB 18047; GB/T 14976; GB/T 17895; QC/T 245
起草单位: 重庆汽车研究所
归口单位: 全国汽车标准化技术委员会
标准依据: 国家发改委公告2006年第18号
范围: 本标准规定了压缩天然气汽车高压管路(以下简称高压管路)的定义、技术要求、试验方法、检验规则、标志、包装、运输及储存。本标准适用于使用符合GB 18047要求的汽车用压缩天然气、额定工作压力为20MPa(本标准所述压力值均指表压), 工作环境温度为-40℃~120℃的高压管路。


QC/T 746-2006
QC
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
High Pressure Pipelines for
Compressed Natural Gas Vehicles
压缩天然气汽车高压管路
ISSUED ON. MARCH 7, 2006
IMPLEMENTED ON. AUGUST 1, 2006
Issued by. National Development and Reform Committee
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Definitions ... 5 
4 Technical requirements... 6 
5 Test method ... 9 
6 Inspection rules ... 15 
7 Marking, packaging, operation instructions, transport and storage ... 16 
Annex A ... 18 
Foreword
Annex A of this Standard is normative.
This Standard is formulated for the first time.
This Standard was proposed by National Technical Committee for Standardization of
Automobiles.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Automobiles.
Drafting organizations of this Standard. Chongqing Automotive Research Institute,
Chongqing China Natural Gas Vehicles Co., Ltd.
Main drafters of this Standard. Chen Wanying, Zhang Haihui, Wang Kai.
This Standard shall be responsibly interpreted by National Technical Committee for
Standardization of Automobiles.
High Pressure Pipelines for
Compressed Natural Gas Vehicles
1 Scope
This Standard specifies the definitions, technical requirements, test methods, inspection
rules, marking, packaging, transport, and storage of high pressure pipelines for
compressed natural gas vehicles (hereinafter referred to as high pressure pipelines).
This Standard applies to high-pressure pipelines that use compressed natural gas as
vehicle fuel, of which the rated working pressure is 20MPa (all pressure values stated in
this Standard refer to gauge pressure), and the operating environmental temperature is
-40°C ~ 120°C.
2 Normative references
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments (excluding
corrigendum) or revisions do not apply to this Standard, however, parties who reach an
agreement based on this Standard are encouraged to study if the latest versions of these
documents are applicable. For undated references, the latest edition of the referenced
document applies.
GB/T 528 Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress -
Strain Properties
GB/T3765 Cone Connectors - Specification
GB/T5563 Rubber and Plastics Hoses and Hose Assemblies - Hydrostatic Testing
GB/T 5564 Rubber and Plastics Hoses - Subambient Temperature Flexibility Tests
GB/T9571 Ozone Resistance Test Method of Rubber and Plastic Hoses under Static
Conditions
GB/T9576 Rubber and Plastics Hoses and Hose Assemblies - Guidelines for
Selection, Storage, Use and Maintenance
GB/T 9577 Rubber and Plastics Hoses and Hose Assemblies - Rules for Marking,
Package and Transportation
GB 9969.1 General Principles for Preparation of Instructions for Use of Industrial
Products
GB 18017 Compressed Natural Gas as Vehicle Fuel
GB/T 14976 Seamless Stainless Steel Pipes for Fluid Transport
GB/T 17895 Natural Gas Vehicle and Liquefied Petroleum Gas Vehicle - Vocabulary
QC/T 245 Technical Conditions of Compressed Natural Gas Vehicles - Specific
Devices
3 Definitions
The terms and definitions established in GB/T 17895 and following terms and definitions
apply to this Standard.
High-pressure pipelines
A generic term of all pipe fittings and joints that are installed to natural gas vehicles and
connect air cylinder with decompression regulator.
3.2
Connectors
Parts in natural gas fuel system that connect devices or pipelines.
3.3
Rigid high-pressure fuel pipes
High-pressure steel pipes that connect parts of natural gas fuel system for circulation of
3.4
High-pressure flexible fuel pipes
Flexible pipes that connect parts of natural gas fuel system for circulation of high-pressure
natural gas.
4.2.1.3 Ultra-torque characteristics
High-pressure pipeline shall be subjected to ultra-torque characteristics test according to
the test prescribed in 5.5; test piece shall be free of thread damage, deformation and
break; air tightness test shall conform to the provisions of 4.2.1.2.
4.2.1.4 Durability
prescribed in 5.6; air tightness test shall conform to the provisions of 4.2.1.2.
4. 2.1.5 Corrosion resistance
After high-pressure pipeline receives salt spray corrosion test according to the method
prescribed in 5.7, air tight test shall conform to the provisions of 4.2.1.2.
4.2.1.6 Compatibility
After high-pressure pipeline receives compatibility test according to the test method
prescribed in 5.8.1, test piece is inspected by 25-times magnifying glass, and shall be free
of conspicuous fracture traces.
4.2.1.7 Bending resistance
in 5.9; test piece shall be free of cracks or fracture.
4.2.1.8 Pull strength
High-pressure pipe shall be subjected to pull strength test according to the test method
prescribed in 5.10; if F≥f, then test piece passes the test, .
4.2.1.9 Vibration resistance
After high-pressure pipeline receives vibration test according to the method prescribed in
5.11; air tight test shall conform to the provisions of 4.2.1.2.
4.2.2 High-pressure flexible fuel pipe
4.2.2.1 Hydrostatic pressure strength
method prescribed in 5.3.2.1; pressure-containing parts of high-pressure pipeline
shall be free of leakage.
b) High-pressure pipeline shall be subjected to bursting pressure test according to the
test method prescribed in 5.3.2.2; pressure-containing parts of high-pressure
pipeline shall be free of fracture.
High-pressure flexible fuel pipe and joint shall be able to pass the test prescribed in
4.2.2.1 a) after receiving impact test for 15, 000 times according to the method prescribed
in 5.17.
5 Test methods
5.1.1 General provisions
Unless otherwise specified, tests prescribed in this Standard shall be carried out under
following conditions.
a) Test environment temperature is 20°C±5°C;
b) Test medium shall be clean dry air or nitrogen.
5.1.2 Requirements for precision of test instruments
a) Pressure instrument. Accuracy is not lower than grade 2.5; measurement error is
less than ±10% of reading.
b) Flow instrument. Accuracy is not lower than grade 2.5; measurement error is less
c) Temperature instrument. Accuracy is ±0.5°C; the minimum resolution is not greater
than 2 times the accuracy.
5.2 Visual inspection
Inspect high-pressure pipeline assembly visually; the results shall conform to relevant
provisions in chapter 4.
5.3 Hydrostatic pressure strength test
5.3.1 High-pressure rigid fuel pipe
Securely install test piece to an enclosed special test bench; block off the outlet of test
piece; test hydraulic pressure is slowly added to test piece; pressurizing duration shall not
pressure.
Samples that have received this test must not be used for other tests.
5.3.2 High-pressure flexible fuel pipe
is necessary to pick out four most severe resonance frequencies from them. During test
period, if resonant frequency changes, change occurring time shall be recorded and
vibration frequency shall be immediately adjusted in order to maintain resonance state of
peak value. Record the final resonance frequency. Test piece shall be subjected to air
tight test after it is completed.
5.12 Tensile strength test of high-pressure flexible fuel pipe follows the provisions GB/T
5.13 Ozone resistance test
Ozone resistance test of high-pressure pipe follows the provisions of GB/T 9571.
5.14 Low-temperature bending test
High-pressure flexible fuel pipe follows the provisions on method B in GB/T 5564; place at
a temperature of -40°C±2°C for 24h; check the surface of test piece with 2-times
magnifying glass.
5.15 Oxygen aging resistance test
Hang the samples vertically in oxygen pressure vessel, in a free state. Samples shall not
be crowded, or contact each other, or touch container wall. Samples with different
system; after the medium is preheated to working temperature, place container with
samples into heading medium; pressurize with pressurized oxygen when test temperature
is constant; calculate aging time when the pressure reaches the predetermined value. It is
required to drop container pressure to normal pressure slowly and evenly, in at least 5min,
after reaching predetermined time and before taking samples out of the container.
5.16 Leakage test
Leakage test of high-pressure flexible fuel pipe follows the provisions in annex A.
5.17 Impact test of high-pressure flexible fuel pipe
This test ...
相关标准:  QC/T 745-2006  QC/T 378-2013  QC/T 379-2013
英文版PDF:  QC/T 746-2006  QC/T746  QCT746  QC746  QC/T746-2006  QCT746-2006  QC746-2006  QC/T 746  QCT 746  QC 746
   
宁德梧三商贸有限公司 | 纳税人识别号:91350900MA32WE2Q2X | 营业执照:营业执照证书
点击联络我们 联系电邮郑文锐销售经理: Sales@gb-gbt.cn | Sales@ChineseStandard.net | 电话郑经理: 18059327808 | 增值税普通发票 / 增值税专用发票样品
对公开户银行:中国建设银行古田支行 | 账户名称:宁德梧三商贸有限公司 | 账号:35050168730700000955 对公银行账号证书
翻译支持:全资母公司新加坡场测亚洲公司(https://www.ChineseStandard.net 卖欧美后再内销)
网站备案许可:闽ICP备19012676号 http://www.beian.miit.gov.cn
隐私   ·  优质产品   ·  退款政策   ·  公平交易   ·  关于我们