9秒发货/有发票 梧三标准英文版 优质技术翻译  数据库收录:159759 最近更新:2020-06-13  
支付宝/对公账号 首页   询价  购买流程  英文样品 公司简介   购物车

QC/T 791-2007

标准搜索结果: 'QC/T 791-2007'
标准号码内文价格(元)第2步交付天数标准名称状态
QC/T 791-2007 英文版 320 购买 现货,9秒内自动发货PDF,有增值税发票。 电动摩托车和电动轻便摩托车定型试验规程 有效

   
标准编号: QC/T 791-2007 (QC/T791-2007)
中文名称: 电动摩托车和电动轻便摩托车定型试验规程
英文名称: Electric motorcycles and electric mopeds. Engineering approval evaluation program
行业: 汽车行业标准 (推荐)
中标分类: T80
国际标准分类: 43.140
字数估计: 9,929
发布日期: 2007-11-14
实施日期: 2008-05-01
引用标准: GB/T 4094.2; GB/T 5374; GB/T 18387; GB 24155; GB/T 24156; GB/T 24157; GB/T 24158
起草单位: 国家机动车产品质量监督检验中心(上海)
归口单位: 全国汽车标准化技术委员会
标准依据: 国家发改委公告2007年第77号
范围: 本标准规定了电动摩托车和电动轻便摩托车新产品设计定型试验的实施条件及试验项目、试验方法和评定依据以及试验程序、试验报告所需的内容。本标准适用于电动摩托车和电动轻便摩托车(定义见GB/T 24158-2009)(除特殊说明外, 以下简称为电动摩托车)。


QCT 791-2007
QC
NATIONAL AUTOMOTIVE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.140
T 80
Electric Motorcycles and Electric Mopeds –
Engineering Approval Evaluation Program
电动摩托车和电动轻便摩托车 定型试验规程
ISSUED ON. NOVEMBER 14, 2007
IMPLEMENTED ON. MAY 1, 2008
Issued by. National Development and Reform Commission
National Development and
Reform Commission of the PRC
Announcement
Year 2007 No. 77
The National Development and Reform Commission approves 139 industry standards
(see Schedule I for the standard numbers, names, start and implementation dates)
including Polyester Filament Embroidery Threads; these 139 standards contain 12
textile industry standards, 15 petrochemical industry standards, 70 non-ferrous metal
industry, 12 pharmaceutical equipment industry standards, 30 automotive industry
standards; the commission also approves the amendment (see Schedule II) of 1 non-
ferrous metal industry standard of YS/T 318-2007 Copper Concentrate; it is announced
thereby, and shall be implemented since the date of promulgation. All industry
standards mentioned above shall be implemented since May 1, 2008.
The above textile industry standards are published by Textile Industry Publishing
House; the petrochemical industry standards are published by China Petrochemical
Press; the non-ferrous metal industry standards are published by Standards Press of
China; the pharmaceutical equipment & automotive industry standards are published
by China Planning Press.
Schedule. numbers and names of 30 automotive industry standards.
National Development and Reform Commission of the PRC
November 14, 2007
Schedule.
Numbers and Names of 30 Automotive Industry Standards
SN Standard Numbers Standard Names Replaced Standards
110 QC/T 476-2007 Rain Proof Performance Limit and Test Method for Bus
GB/T 12480-1990
QC/T 476-1999
111 QC/T 780-2007 Water Radiator Used in Motorcycles
112 QC/T 688-2007 General Specifications of Motorcycles and Mopeds QC/T 688-2002
113 QC/T 781-2007 Braking disc for motorcycles and mopeds
114 QC/T 634-2007 Vehicle Water - Heating Air Heater Mechanism QC/T 634-2000
115 QC/T 518-2007 Tightening Torque for Automotive Threaded Fasteners QC/T 518-1999
116 QC/T 323-2007 Motor Vehicles - Door Locks and Door Retention Components
QC/T 323-1999
QC/T 586-1999
117 QC/T 782-2007 Dump Cover-Specifications
118 QC/T 673-2007 Solenoid Valve of LPG Vehicles QC/T 673-2000
119 QC/T 674-2007 Solenoid Valve of CNG Vehicles QC/T 674-2000
120 QC/T 208-2007 Temperature Alarms for Automobile QC/T 208-1996
121 QC/T 783-2007 Speedometer Sensor for Automobile and Motorcycle
122 QC/T 727-2007 Instrument for Automobile and Motorcycle QC/T 727-2004
123 QC/T 213-2007 Automobile and Motorcycle Instrument Terminology QC/T 213-1996
124 QC/T 784-2007 Electroluminescent Screen for Automobile and Motorcycle Instrument
125 QC/T 217-2007 Pressure Alarms for Automobile QC/T 217-1996
126 QC/T 215-2007 Type Methodology for Automobile and Motorcycle Instrument QC/T 215-1996
127 QC/T 209-2007 Flexible Shaft for Automobile and Motorcycle QC/T 209-1996
128 QC/T 785-2007
Road Vehicles - Two-Stage Fuel Filters for
Compression-Ignition Engines-Mounting and
Connecting Dimensions
129 QC/T 786-2007
Diesel Engines-Heads for Fuel Filters with
Vertical Flange-Mounting and Connecting
Dimensions
130 QC/T 787-2007
Diesel Engines - Heads for Fuel Filters with
Horizontal Flange-Mounting and Connecting
Dimensions
132 QC/T 789-2007 Performance Requirements and Bench Test
Methods of Automobile Electric Vortex
Retarder Assembly
133 QC/T 790-2007 Performance Requirements and Bench Test Methods for Brake Chamber
134 QC/T 791-2007 Electric Motorcycles and Electric Mopeds-Engineering Approval Evaluation Program
135 QC/T 792-2007 Motors and Controllers for Electric Motorcycles and Electric Mopeds
136 QC/T 793-2007 Specifications and Test Methods of Air Filters for Motorcycles and Scooters
137 QC/T 794-2007 Internal-Combustion Engine Industry Filter Paper
138 QC/T 795.1-2007
Compartment Part 1. Test for Particulate
Filtration
139 QC/T 795.2-2007
Road Vehicles - Air Filters for Passenger
Compartment Part 2. Test for Gaseous
Filtration
Table of Contents
Foreword ... 6
1 Scope ... 7
3 Implementation Conditions ... 8
4 Test Items, Test Methods and Evaluation Basis ... 9
5 Test Procedures ... 9
6 Test Report ... 10
Appendix A (Normative) Motorcycle Mandatory Inspection Standard List ... 11
Foreword
The Appendix A of this Standard belongs to normative appendix.
This Standard shall be under the jurisdiction of National Technical Committee of Auto
Standardization.
Supervision and Inspection Center (Shanghai), China Automotive Technology &
Research Center.
Participating drafting organizations of this Standard. China Jialing Industrial Co., Ltd.
(Group), Zhejiang Qianjiang Motorcycle Co., Ltd., Zhejiang Xingyue Electric Bicycle
Co., Ltd., China Qingqi Motorcycles Co., Ltd., National Electric Bicycle Products
Quality Supervision and Inspection Center, Zhejiang Qunsheng Industry and Trade
Group Co., Ltd., Tianjin Qingyuan Electric Vehicle Co., Ltd., Ananda Drive Techniques
(Shanghai) Co., Ltd., Ningbo Harvest Mechanical & Electrical Co., Ltd.
Chief drafting staffs of this Standard. Hu Wenhao, Zhao Jingwei, Huang Jinquan, Ye
Chunming, Jia Aiping, Chen Mingjun.
Electric Motorcycles and Electric Mopeds –
Engineering Approval Evaluation Program
1 Scope
This Standard specifies the contents required by the implementation conditions, test
items, test methods, evaluation basis, test procedures and test report for the new
product design type test of electric motorcycles and electric mopeds.
This Standard is applicable to electric motorcycles and electric mopeds (see GB/T
24158-2009 for the definitions) (Unless otherwise specified, they are referred to as
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 4094.2 Electric Vehicles - Symbols for Controls, Indicators and Tell-Tales
GB/T 5374 Test Method of Reliability for Motorcycles and Mopeds
Electric Vehicles Broadband 9khz to 30mhz
GB 24155 Electric Motorcycles and Electric Mopeds - Safety Specifications
GB/T 24156 Electric Motorcycles and Electric Mopeds - Power Performance - Test
Methods
GB/T 24157 Electric Motorcycles and Electric Mopeds - Energy Consumption and
Range - Test Procedures
GB/T 24158 Electric Motorcycles and Electric Mopeds - General Specifications
The mandatory standards referenced in this Standard can refer to Appendix A.
Appendix A
Motorcycle Mandatory Inspection Standard List
GB 5948 Photometric Characteristics of Motorcycle Headlamps Equipped with
Filament Light Sources
GB 7258 Safety Specifications for Power-Driven Vehicles Operating on Roads
GB 11564 Retro-Reflector Device for Motor Vehicles
GB 14023 Vehicles, Boats and Internal Combustion Engine - Radio Disturbance
Characteristics - Limits and Methods of Measurement for the Protection of off-Board
Receivers
GB 15365 Symbols for Controls, Indicators and Telltales for Motorcycles
GB 16735 Road vehicle- Vehicle Identification Number (VIN)
GB 17352 Performance and Installation Requirements of Rear Views Mirrors for
Motorcycles and Mopeds
GB 17353 Protective Devices against Unauthorized Use-Steering-Locking for
Motorcycles and Mopeds
GB 17510 Photometric Characteristics of Light-Signaling Devices for Motorcycles
GB 18100 Provisions for Installation of two Wheel Motorcycle and Moped Lighting and
Light-Signaling Devices
GB 19152 Photometric Characteristics of Moped Headlamps
GB 20075 Passenger Hand-Holds on Motorcycles
相关标准:  QC/T 800-2008  QC/T 801-2008  QC/T 688-2016
英文版PDF:  QC/T 791-2007  QC/T791  QCT791  QC791  QC/T791-2007  QCT791-2007  QC791-2007  QC/T 791  QCT 791  QC 791
   
宁德梧三商贸有限公司 | 纳税人识别号:91350900MA32WE2Q2X | 营业执照:营业执照证书
点击联络我们 联系电邮郑文锐销售经理: Sales@gb-gbt.cn | Sales@ChineseStandard.net | 电话郑经理: 18059327808 | 增值税普通发票 / 增值税专用发票样品
对公开户银行:中国建设银行古田支行 | 账号:35050168730700000955 | 账户名称:宁德梧三商贸有限公司 | 大额行号(非必须):105403500207 对公银行账号证书
翻译支持:全资母公司新加坡场测亚洲公司(https://www.ChineseStandard.net 卖欧美后再内销)
网站备案许可:闽ICP备19012676号 http://www.beian.miit.gov.cn
隐私   ·  优质产品   ·  退款政策   ·  公平交易   ·  关于我们