9秒发货/有发票 梧三标准英文版 优质技术翻译  数据库收录:159759 最近更新:2020-03-18  
支付宝/对公账号 首页   询价  购买流程  英文样品 公司简介   购物车

YY/T 0698.7-2009

标准搜索结果: 'YY/T 0698.7-2009'
标准号码内文价格(元)第2步交付天数标准名称状态
YY/T 0698.7-2009 英文版 1469 购买 有增值税发票,[PDF]天数 <=3 最终灭菌医疗器械包装材料 第7部分:环氧乙烷或辐射灭菌 无菌屏障系统生产用可密封涂胶纸要求和试验方法 有效

   
标准详细信息 YY/T 0698.7-2009; YY/T0698.7-2009; YYT 0698.7-2009; YYT0698.7-2009
中文名称: 最终灭菌医疗器械包装材料 第7部分:环氧乙烷或辐射灭菌 无菌屏障系统生产用可密封涂胶纸要求和试验方法
英文名称: Packaging materials for terminal sterilized medical devices. Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods
行业: 医药行业标准 (推荐)
中标分类: C31
国际标准分类: 11.080.040
字数估计: 16,000
发布日期: 2009-06-16
实施日期: 2010-12-01
引用标准: GB/T 451.2; GB/T 454; GB/T 455; GB/T 458; GB/T 465.1; GB/T 465.2; GB/T 1540; GB/T 1545.2; GB/T 2678.6; GB/T 7408; GB/T 7974-2002; GB/T 12914; ISO 6588-2-2005; ISO 9197; ISO 11607-1
起草单位: 山东省医疗器械产品质量检验中心
归口单位: 国家食品药品监督管理局济南医疗器械质量监督检验中心
标准依据: 行业标准备案公告2009年第9号
提出机构: National Standardization Technical Committee appliances Infusion
发布机构: China Food and Drug Administration
范围: YY/T 0698的本部分提供了用符合YY/T 0698.6的纸生产的可密封涂胶纸的要求和试验方法。该包装材料用作对最终采用环氧乙烷或辐射灭菌的医疗器械包装。本部分未对ISO 11607-1的通用要求增加要求, 只是在ISO 11607-1、相关国家标准的基础上对各要素提供指南。因此, 4.2~4.3中的专用要求可用以证实符合ISO 11607-1的一项或多项要求, 但不是其全部要求。

YY/T 0698.7-2009
Packaging materials for terminal sterilized medical devices.Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation.Requirements and test methods
ICS 11.080.040
C31
中华人民共和国医药行业标准
YY/T0698.7-2009
最终灭菌医疗器械包装材料
第7部分:环氧乙烷或辐射灭菌
无菌屏障系统生产用可密封涂胶纸
要求和试验方法
2009-06-16发布
2010-12-01实施
国家食品药品监督管理局 发 布
前言
YY/T 0698《最终灭菌医疗器械包装材料》,由以下几部分组成:
---第2部分:灭菌包裹材料 要求和试验方法;
---第3部分:纸袋(YY/T 0698.4所规定)、组合袋和卷材(YY/T 0698.5所规定)生产用纸 要
求和试验方法;
---第4部分:纸袋 要求和试验方法;
---第5部分:透气材料与塑料膜组成的可密封组合袋和卷材 要求和试验方法;
---第6部分:用于低温灭菌过程或辐射灭菌的无菌屏障系统生产用纸 要求和试验方法;
---第7部分:环氧乙烷或辐射灭菌无菌屏障系统生产用可密封涂胶纸 要求和试验方法;
---第8部分:蒸汽灭菌器用重复性使用灭菌容器 要求和试验方法;
---第9部分:可密封组合袋、卷材和盖材生产用无涂胶聚烯烃非织造布材料 要求和试验方法;
---第10部分:可密封组合袋、卷材和盖材生产用涂胶聚烯烃非织造布材料 要求和试验方法。
本部分为YY/T 0698的第7部分。
其他最终灭菌医疗器械包装材料的要求和试验方法将在其他部分中规定。
其他医疗器械包装的要求和试验方法YY/T 0698将在其他部分中规定。
YY/T 0698的本部分等同采用prEN868-7:2007《最终灭菌医疗器械包装材料 第7部分:用于环
氧乙烷或辐射灭菌的医用无菌屏障系统生产用可密封涂胶纸 要求和试验方法》。
本部分的附录A、附录B、附录C、附录D和附录E都是规范性附录。
本部分由全国医用输液器具标准化技术委员会提出。
本部分由国家食品药品监督管理局济南医疗器械质量监督检验中心归口。
本部分主要起草单位:山东省医疗器械产品质量检验中心、上海康德莱企业发展集团有限公司。
本部分参加起草单位:上海建中医疗器械包装有限公司。
本部分主要起草人:闫宁、宋龙富、李军生、张洪辉。
YY/T0698.7-2009
引 言
ISO 116071)标准总标题为“最终灭菌医疗器械的包装”,包括两个部分。该标准的第1部分规定了
预期在使用前保持最终灭菌医疗器械无菌的预成形无菌屏障系统、无菌屏障系统和包装系统的通用要
求和试验方法。该标准的第2部分规定了成形、密封和装配过程的确认要求。
每个无菌屏障系统必须满足ISO 11607-1的要求。
YY/T 0698标准可用于证实符合ISO 11607-1规定的一项或多项要求。
1) EN868-1:1997已被ISO 11607-1:2006所代替。我国与ISO 11607对应的标准是 GB/T 19633-2005
(ISO 11607:2003,IDT)。请注意GB/T 19633的修订情况。
YY/T0698.7-2009
最终灭菌医疗器械包装材料
第7部分:环氧乙烷或辐射灭菌
无菌屏障系统生产用可密封涂胶纸
要求和试验方法
1 范围
YY/T 0698的本部分提供了用符合YY/T 0698.6的纸生产的可密封涂胶纸的要求和试验方法。
该包装材料用作对最终采用环氧乙烷或辐射灭菌的医疗器械包装。
本部分未对ISO 11607-1的通用要求增加要求,只是在ISO 11607-1、相关国家标准的基础上对各
要素提供指南。因此,4.2~4.3中的专用要求可用以证实符合ISO 11607-1的一项或多项要求,但不是
其全部要求。
2 规范性引用文件
下列文件中的条款通过YY/T 0698的本部分的引用而成为本部分的条款。凡是注日期的引用文
件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成
协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本
部分。
GB/T 451.2 纸和纸板定量的测定GB/T 451.2-2002,eqv ISO 536:1995
GB/T 454 纸耐破度的测定(GB/T 454-2002,idt ISO 2758:2001)
GB/T 455 纸和纸板撕裂度的测定(GB/T 455-2002,eqv ISO 1974:1990)
GB/T 458 纸和纸板 透气度的测定(GB/T 458-2008,ISO 5636-2:1984,ISO 5636-3:1992,
ISO 5636-5:2003,MOD)
GB/T 465.1 纸和纸板 浸水后耐破度的测定法(GB/T 465.1-2008,ISO 3689:1983,IDT)
GB/T 465.2 纸和纸板 浸水后抗张强度的测定法(GB/T 465.2-2008,ISO 3781:1983,IDT)
GB/T 1540 纸和纸板吸水性的测定 可勃法(GB/T 1540-2002,neq ISO 535:1991)
GB/T 1545.2 纸、纸板和纸浆水抽提液pH的测定(GB/T 1545.2-2003,modISO 6588:1981)
GB/T 2678.6 纸、纸板和纸浆水溶性硫酸盐的测定(电导滴定法)(GB/T 2678.6-1996,
eqv ISO 9198:1989)
GB/T 7408 数据元和交换格式 信息交换 日期和时间表示法(GB/T 7408-2005ISO 8601:
2001,IDT)
GB/T 7974-2002 纸、纸板和纸浆亮度(白度)的测定 漫射/垂直法(neq ISO 2470:1999)
GB/T 12914 纸和纸板 抗张强度的测定(GB/T 12914-2008,ISO 1924-2:1994,MOD)
ISO 6588-2:2005 纸、纸板和纸浆 水抽提液pH的测定 第2部分:热抽提
ISO 9197 纸、纸板和纸浆 水溶性氯化物的测定
ISO 11607-1 最终灭菌医疗器械的包装 第1部分:材料、无菌屏障系统和包装系统的要求
3 术语和定义
4 要求
4.1 总则
ISO 11607-1的要求适用。
注:下列专用要求和试验方法可用于证实ISO 11607-1的一项或多项要求,但不是全部要求。
YY/T0698.7-2009

YY/T 0698.7-2009
Packaging materials for terminal sterilized medical devices.Part 7. Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation.Requirements and test methods
ICS 11.080.040
C31
People's Republic of China pharmaceutical industry standards
Terminally sterilized medical devices packaging materials
Part 7. ethylene oxide or radiation sterilization
Sterile barrier systems production sealable adhesive paper
Requirements and test methods
Posted 2009-06-16
2010-12-01 implementation
State Food and Drug Administration issued
Foreword
YY/T 0698 "terminally sterilized medical device packaging materials," consists of the following components.
--- Part 2. Sterilization wrap material requirements and test methods;
--- Part 3. paper (YY/T 0698.4 forth), a combination of bags and coils (YY/T 0698.5 forth) to produce paper
Sum Test methods;
--- Part 4. Paper bags - Requirements and test methods;
--- Part 5. sealable bags and coil combination requirements and test methods breathable material and plastic film composition;
--- Part 6. Requirements and test methods for the production of paper sterile barrier system or low temperature sterilization processes for radiation sterilization;
--- Part 7. ethylene oxide or radiation sterilization production sealable adhesive paper requirements and test methods for sterile barrier system;
--- Part 8. steam sterilizers repeatability requirements and test methods for sterilizing containers;
--- Part 9. combination sealable bags, and the cover sheet material production without nonwovens requirements and test methods for coating polyolefin;
--- Part 10. combination sealable bags, and the cover sheet material production nonwovens requirements and test methods for coating polyolefin.
This section YY/T Section 70698 of.
Requirements and test methods other terminally sterilized medical devices packaging material will be covered in other sections.
Requirements and test methods YY other medical device packaging/T 0698 will be specified in other sections.
YY/T 0698 is identical with this part prEN868-7.2007 "terminally sterilized medical device packaging materials - Part 7. for ring
Ethylene oxide or radiation sterilization of medical sterile barrier system can be sealed with adhesive paper production requirements and test methods. "
This section of the Appendix A, Appendix B, Appendix C, Appendix D and Appendix E are normative appendix.
This part of the National Standardization Technical Committee appliances medical infusion made.
This part of the jurisdiction of the State Food and Drug Administration Jinan Medical Device Quality Supervision and Inspection Center.
This part mainly drafted by. Shandong Province Medical Devices Product Quality Inspection Center, Shanghai Kindly Enterprise Development Group Company Limited.
Participated in the drafting of this section. Shanghai Jianzhong medical equipment Packing Co., Ltd.
The main drafters of this section. Yan Ning, Song Longfu SCENCE Zhang Honghui.
introduction
ISO 116071) standard the general title "Packaging for terminally sterilized medical devices", consists of two parts. Part 1 of this standard specifies
Expected before use to keep terminally sterilized medical devices to common sterile preformed sterile barrier systems, sterile barrier systems and packaging systems
Sum test methods. Part 2 of this standard specifies validation requirements forming, sealing and assembly processes.
Each sterile barrier system must meet the requirements of ISO 11607-1.
YY/T 0698 standard can be used to demonstrate compliance with one or more of the requirements specified in ISO 11607-1.
1) EN868-1.1997 has been ISO 11607-1.2006 is replaced. Our correspondence with the ISO 11607 standard is GB/T 19633-2005
(ISO 11607.2003, IDT). Please note that the revision of GB/T 19633 of.
Terminally sterilized medical devices packaging materials
Part 7. ethylene oxide or radiation sterilization
Sterile barrier systems production sealable adhesive paper
Requirements and test methods
1 Scope
This section YY/T 0698 provides the requirements and test methods comply with YY/T 0698.6 of paper production sealable adhesive paper.
The packaging material used for the eventual adoption of ethylene oxide or radiation sterilization of medical device packaging.
This part is not general requirements for ISO 11607-1 requirements increase, but in ISO 11607-1, the relevant national standards on the basis of each
Elements provide guidance. Thus, in the 4.2 to 4.3-specific requirements can be used to demonstrate compliance with one or more of the requirements of ISO 11607-1, but not
All of its requirements.
2 Normative references
The following documents contain provisions which, through YY/T 0698 reference in this text, constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 451.2 Paper and paperboard quantitative determination of GB/T 451.2-2002, eqv ISO 536.1995
GB/T 454 Determination of bursting strength of paper (GB/T 454-2002, idt ISO 2758.2001)
GB/T 455 Paper and board - Determination of tearing resistance (GB/T 455-2002, eqv ISO 1974.1990)
GB/T 458 Paper and board - Determination of air permeability (GB/T 458-2008, ISO 5636-2. 1984, ISO 5636-3.1992,
ISO 5636-5.2003, MOD)
GB/T 465.1 Paper and paperboard bursting strength after immersion in water assay (GB/T 465.1-2008, ISO 3689. 1983, IDT)
GB/T 465.2 after soaking paper and board Determination of tensile strength (GB/T 465.2-2008, ISO 3781. 1983, IDT)
GB/T 1540 Determination of absorbent paper and cardboard Cobb method (GB/T 1540-2002, neq ISO 535.1991)
GB/T 1545.2 paper, board and pulp - Determination of pH of aqueous extracts (GB/T 1545.2-2003, modISO 6588. 1981)
GB/T 2678.6 paper, board and pulp - Determination of water soluble sulphates (conductometric titration) (GB/T 2678.6-1996,
eqv ISO 9198. 1989)
GB/T 7408 Data elements and interchange formats - Information interchange the date and time notation (GB/T 7408-2005ISO 8601.
GB/T 7974-2002 paper, paperboard and pulp brightness (whiteness) measured diffusion/vertical method (neq ISO 2470.1999)
GB/T 12914 Paper and board - Determination of tensile strength (GB/T 12914-2008, ISO 1924-2.1994, MOD)
ISO 6588-2.2005 Paper, board and pulp - Determination of pH of aqueous extracts - Part 2. Hot Extraction
ISO 9197 Determination of paper, paperboard and pulp water-soluble chlorides
Requested materials, sterile barrier systems and packaging systems. ISO 11607-1 Packaging for terminally sterilized medical devices - Part 1
3 Terms and Definitions
Terms and definitions apply to the establishment of ISO 11607-1 YY/T 0698 to the present section.
4 Requirements
4.1 General
NOTE. The following specific requirements and test methods ISO 11607-1 can be used to confirm one or more of the requirements, but not all of the requirements.
   
宁德梧三商贸有限公司 | 纳税人识别号:91350900MA32WE2Q2X | 营业执照:营业执照证书
点击联络我们 联系电邮郑文锐销售经理: Sales@gb-gbt.cn | Sales@ChineseStandard.net | 电话郑经理: 18059327808 | 增值税普通发票 / 增值税专用发票样品
对公开户银行:中国建设银行古田支行 | 账户名称:宁德梧三商贸有限公司 | 账号:35050168730700000955 对公银行账号证书
翻译支持:全资母公司新加坡场测亚洲公司(https://www.ChineseStandard.net 卖欧美后再内销)
网站备案许可:闽ICP备19012676号 http://www.beian.miit.gov.cn
隐私   ·  优质产品   ·  退款政策   ·  公平交易   ·  关于我们