9秒发货/有发票 梧三标准英文版 优质技术翻译  数据库收录:159759 最近更新:2020-02-08  
支付宝/对公账号 首页   询价  购买流程  英文样品 公司简介   购物车

YY/T 1160-2009

标准搜索结果: 'YY/T 1160-2009'
标准号码内文价格(元)第2步交付天数标准名称状态
YY/T 1160-2009 英文版 470 购买 现货,9秒内自动发货PDF,有增值税发票。 癌胚抗原(CEA)定量测定试剂(盒)(化学发光免疫分析法) 有效

   
标准详细信息 YY/T 1160-2009; YY/T1160-2009; YYT 1160-2009; YYT1160-2009
中文名称: 癌胚抗原(CEA)定量测定试剂(盒)(化学发光免疫分析法)
英文名称: Carcinoembryonic Antigen Quantitative Detection Reagent (Kit) (Chemiluminescent Immunoassay)
行业: 医药行业标准 (推荐)
中标分类: C44
国际标准分类: 11.100
字数估计: 10,000
发布日期: 2009-12-30
实施日期: 2011-06-01
引用标准: GB/T 21415-2008
起草单位: 北京市医疗器械检验所
归口单位: 全国医用临床检验实验室和体外诊断系统标准化技术委员会
标准依据: 国家食品药品监督管理局公告2009年第83号
范围: 本标准规定了癌胚抗原(CEA)定量测定试剂(盒)(化学发光免疫分析法)的术语和定义、分类、要求、试验方法、检验规则、标识、标签、使用说明书、包装、运输和贮存等。本标准适用于以化学发光免疫分析法为原理定量测定人癌胚抗原(CEA)定量测定试剂(盒)(以下简称“CEA试剂(盒)”, 包括以微孔板、管、磁颗粒、微珠和塑料珠等为载体的酶促及非酶促化学发光免疫分析测定试剂(盒)。本标准不适用于对试剂盒中的校准品和质控品的要求。


YY/T 1160-2009
YY
ICS 11.100
C 44
PHARMACEUTICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Carcinoembryonic Antigen Quantitative Detection
Reagent (Kit)
(Chemiluminescent Immunoassay)
癌胚抗原(CEA)定量测定试剂(盒)
(化学发光免疫分析法)
ISSUED ON. DECEMBER 30, 2009
IMPLEMENTED ON. JUNE 1,2011
Issued by. State Food and Drug Administration
Table of Contents
Foreword ... 3 
1  Scope ... 4 
2  Normative references ... 4 
3  Terms and definitions ... 4 
4  Classifications ... 6 
5  Requirements ... 6 
6  Test methods ... 7 
7  Product inspection rules ... 9 
8  Marks, labels and instructions ... 10 
9  Packaging, transportation and storage ... 12 
Bibliography ... 13 
Foreword 
The preparation of this Standard follows the basic regulations of the GB/T 1.1-2000 Directives for
Standardization. Part 1. Rules for the Structure and Preparation of Standards. It is the basis for
evaluating the product quality of carcinoembryonic antigen quantitative determination reagent (kit)
(chemiluminescent immunoassay).
This Standard was proposed by the China Food and Drug Administration.
This Standard shall be under the jurisdiction of the National Medical Clinical Testing Laboratory
and In Vitro Diagnostic System Standardization Technical Committee (SAC/TC 136).
Participating drafting organizations of this Standard. Beijing Institute of Medical Device Testing,
Beijing Chemclin Biotech Co., Ltd., Beijing Yuande Biomedical Engineering Co., Ltd., Roche
Diagnostic Products (Shanghai) Co., Ltd., and Beckman Coulter Co., Ltd.
Main drafters of this Standard. Zhang Xinmei, Cheng Yinghao, Sun Xudong, Hu Guomao, Ying
Xitang, Cai Xiaorong, and Zhang Jinwen.
Carcinoembryonic Antigen Quantitative Detection Reagent (Kit)
(Chemiluminescent Immunoassay)
1  Scope 
This Standard specifies the terms and definitions, classification, requirements, test methods,
inspection rules, marks, labels, operating instructions, packaging, transportation, and storage of
carcinoembryonic antigen (CEA) quantitative determination reagent (kit) (chemiluminescent
immunoassay).
This Standard applies to the quantitative determination of human carcinoembryonic antigen (CEA)
quantitative detection reagent (kit) (hereinafter referred to as "CEA reagent (kit)") based on the
principle of chemiluminescent immunoassay. It includes enzymatic and non-enzymatic
chemiluminescent immunoassay detection reagent (box) with carriers such as microplates, pipes,
magnetic particles, microbeads, and plastic beads.
The Standard is not applicable to the requirements to the calibration products and quality control
products in the kit.
2  Normative references 
The articles contained in the following documents have become part of this Standard when they
are quoted herein. For the dated documents so quoted, all the modifications (excluding corrections)
or revisions made thereafter shall not be applicable to this Standard. For the undated documents
so quoted, the latest editions shall be applicable to this Standard.
GB/T 21415-2008 In vitro diagnostic medical devices - Measurement of quantities in
biological samples - Metrological traceability of values assigned to calibrators and control
materials (ISO 17511.2003, IDT)
3  Terms and definitions 
For the purpose of this Standard, the following terms and definitions apply.
3.1
Chemiluminescence, CL
It refers to the luminescence phenomenon – because the chemical reaction can generate the
substances of which the electronic energy level is in the excited state; the electrons can generate
photons and release energy through transition; therefore it causes the luminescence
CALCULATE the mean. USE the Least Square Method to perform the straight-line fitting for the
results’ mean and dilution proportion. CALCULATE the linear correlation coefficient r. The result
6.6 Repeatability
Each sample of 10ng/mL±2ng/mL and 100ng/mL±20ng/mL is repeatedly tested for 10 times.
CALCULATE the mean M and standard deviation SD of the 10 measurement results. Coefficient of
variation CV is calculated from Equation of CV=SD/M×100%. The results shall comply with the
requirements of 5.6.
6.7 Difference between batches
Repeatedly USE 3 batches of kits to test the same-sample with concentration of
100ng/mL±20ng/mL for 10 times. CALCULATE the mean M and standard deviation SD of 30-times
measurement results. CALCULATE the coefficient of variation CV from Equation CV=SD/M×100%.
6.8 Stability
a) Stability within the validity. TAKE the after-expired sample. PERFORM the detection
according to the methods of 6.3, 6.4, 6.5 and 6.6. It shall comply with the requirements of
5.8 a).
b) Thermal stability test. TAKE the within-validity sample. PLACE for 3 days at 37°C.
PERFORM the detection according to the methods of 6.3, 6.4, 6.5 and 6.6. It shall comply
with the requirements of 5.8 b).
7  Product inspection rules 
7.1 General provisions
inspection and type inspection.
7.2 Reagent (kit) must be delivered to the Quality Inspection Department for inspection. It can be
sold only after inspection is qualified.
7.3 Reagent (kit) must be submitted for ex-factory inspection in batches. Each material-feeding
batch is deemed as 1 batch of products.
7.4 Ex-factory inspection
7.4.1 Amount of sampling
The amount of sampling of ex-factory inspection shall be 3 times of the amount of inspection items,
including the amount of inspection, amount of re-inspection and the amount of retained sample.
c) Medical device registration certificate number and product standard number;
d) Product batch number;
e) Period of validity;
f) Storage conditions.
8.2 Each constituent of reagent (kit)
It shall contain at least the following contents.
a) Product name and specifications;
b) Name or marks of manufacturing enterprise;
c) Product batch number;
8.3 Operating instructions of reagent (kit)
It shall contain at least the following contents.
a) Product name;
b) Packaging specifications;
c) Intended use;
d) Inspection principle;
e) Main compositions;
f) Storage conditions and period of validity;
g) Applicable instrument;
i) Inspection methods;
j) Reference value (reference range);
k) Interpretation of the inspection results;
l) Limitations of inspection methods;
Bibliography 
1) GB/T 191 Packaging - Pictorial marking for handling of goods
2) GB/T 9969 General principles for preparation of instructions for use of industrial products
3) YY 0466-2003 Medical devices - Symbols to be used with medical device labels labelling
and information to be supplied (ISO 15223-2000, IDT)
samples of biological origin - Requirements for content and presentation of reference
measurement procedures (ISO 15193.2002, IDT)
5) ISO/DIS 18113-1 Clinical laboratory testing and in vitro diagnostic medical systems -
Information supplied by the manufacturer (labelling) - Part 1. Terms, definitions and general
requirements
   
宁德梧三商贸有限公司 | 纳税人识别号:91350900MA32WE2Q2X | 营业执照:营业执照证书
点击联络我们 联系电邮郑文锐销售经理: Sales@gb-gbt.cn | Sales@ChineseStandard.net | 电话郑经理: 18059327808 | 增值税普通发票 / 增值税专用发票样品
对公开户银行:中国建设银行古田支行 | 账户名称:宁德梧三商贸有限公司 | 账号:35050168730700000955 对公银行账号证书
翻译支持:全资母公司新加坡场测亚洲公司(https://www.ChineseStandard.net 卖欧美后再内销)
网站备案许可:闽ICP备19012676号
隐私   ·  优质产品   ·  退款政策   ·  公平交易   ·  关于我们