标准搜索结果: 'QC/T 840-2010英文版'
| 标准号码 | 内文 | 价格(元) | 第2步 | 交付天数[PDF] | 标准名称 | 相关标准 |
| QC/T 840-2010 |
英文版
| 300 |
购买全文
|
现货, 9秒内下载
|
电动汽车用动力蓄电池产品规格尺寸
|
QCT 840-2010
|
标准编号: QC/T 840-2010 (QC/T840-2010)
中文名称: 电动汽车用动力蓄电池产品规格尺寸
英文名称: Specification and dimension of traction battery for electric vehicles
行业: 汽车行业标准 (推荐)
中标分类: T47
国际标准分类: 43.080
字数估计: 11,179
发布日期: 2010-11-22
实施日期: 2011-03-01
引用标准: GB/T 7169; GB/T 2900.41
起草单位: 中国电子科技集团公司第十八研究所
归口单位: 全国汽车标准化技术委员会
标准依据: 工科(2010)第126号
范围: 本标准规定了电动汽车用金属氢化物镍动力蓄电池和锂离子动力蓄电池单体及模块的规格及外形尺寸。本标准适用于电动汽车用金属氢化物镍动力蓄电池和锂离子动力蓄电池单体及模块。
QC/T 840-2010: 电动汽车用动力蓄电池产品规格尺寸
QC/T 840-2010 英文名称: Specification and dimension of traction battery for electric vehicles
中华人民共和国汽车行业标准
电动汽车用动力蓄电池产品规格尺寸
华人民共和国工业和信息化部发布
前 言
本标准是我国第一个涉及电动汽车用动力蓄电池规格化的行业标准，目的是优化动力蓄电池设 计及生产制造，
规范动力蓄电池的研发、
生产及应用，降低动力蓄电池研制单位的研发生产成本及整 车单位的采购成本，促进产业发展。
本标准由全国汽车标准化技术委员会(SAC/TC114) 提出并归口。
本标准起草单位：中国电子科技集团公司第十八研究所、中国汽车技术研究中心。
本标准主要起草人：肖成伟、赵静炜、王芳、孟祥峰。
1 范 围
本标准规定了电动汽车用金属氢化物镍动力蓄电池和锂离子动力蓄电池单体及模块的规格及
外形尺寸。
本标准适用于电动汽车用金属氢化物镍动力蓄电池和锂离子动力蓄电池单体及模块。
2 规范性引用文件
下列文件中的条款，通过在本标准中引用而成为本标准的部分条款。凡是注日期的引用文件，
其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准，
然而，鼓励根据本标准达成 协议的各方研究是否可使用这些文件的最新版本。
凡是不注日期的引用文件，其最新版本适用于本 标准。
GB/T7169 含碱性或其它非酸性电解质的蓄电池和蓄电池组型号命名方法 GB/T 2900.41 电工术语 原电池和蓄电池(IEC 60050(482),IDT)
3 蓄电池型号
蓄电池型号应符合CB/T 7169的规定。
4 蓄电池规格及外形尺寸
4.1 金属氢化物镍氢蓄电池
金属氢化物镍动力蓄电池单体的结构如图1。
4.2 锂离子动力蓄电池
锂离子动力蓄电池单体结构如图2。
表2列出了锂离子动力蓄电池的尺寸。
5 端 子 形 式
动力蓄电池的端子位置及联接方式可与整车企业协商确定。
QC/T 840-2010
QC
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.080
T 47
Specification and dimension of traction battery for
electric vehicles
ISSUED ON. NOVEMBER 22, 2010
IMPLEMENTED ON. MARCH 1, 2011
Issued by. Ministry of Industry and Information Technology of China
Announcement of Ministry of Industry and
Information Technology of China
Engineering [2010] No.126
The Ministry of Industry and Information Technology approved 438 industry
standards such as Types of Hybrid Electric Vehicles, including 6 automotive
industry standards, 58 light industry standards, 133 chemical industry
standards, 3 petrochemical industry standards, 49 black metallurgical industry
standards, 2 gold industry standards, 105 non-ferrous metals industry
standards, 6 RE industry standards, 68 building materials industry standards, 8
civil explosive industry standards; 28 industrial standard samples such as Metal
manganese (1), including 26 black metallurgical industry standard samples, 2
non-ferrous metal industry standard samples; 2 light industry standard
amendments such as Optics Resin Spectacles Lenses (QB 2506-2001). The
above 28 industry standard samples and 2 standard amendments are hereby
promulgated and shall come into force as of the date of promulgation.
The standards of the automobile industry are published by China Planning
Publishing House. The standards of the light industry are published by China
Light Industry Press. The standards of the chemical industry are published by
Chemical Publishing House. The standards of petrochemical industry are
published by Sinopec Press. The metallurgical industry standards are published
by Metallurgical Industry Press. The standards of gold, non-ferrous metals and
rare earth industry are published by the China Standard Publishing House. The
standards of building materials industry are published by the Building Materials
Industry Press. The standards of civil explosive industry are published by China
Ordnance Standardization.
Annex. standard numbers, names and date of implementation of 6 auto industry
standards
Ministry of Industry and Information Technology of China
November 22, 2010
Table of Contents
Announcement of Ministry of Industry and Information Technology of China ... 2
Annex... 3
Foreword ... 5
1 Scope ... 6
2 Normative references ... 6
3 Storage battery type ... 6
4 Specification and dimension of storage battery ... 6
5 Terminal form ... 9
Foreword
This Standard is China’s first industrial standard related to standardization of
power storage batteries for electric vehicles of which its purpose is to OPTIMIZE
the design and manufacture of power battery, STANDARDIZE the research and
development, production and application of power battery, REDUCE the R&D
and production cost of power battery development organization and the
procurement cost of vehicle unit, and PROMOTE the development of the
industry.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee on Automobile of Standardization Administration of China
(SAC/TC 114).
The drafting organizations of this Standard. China Electronics Technology
Group Corporation 18th Research Institute, China Automotive Technology and
Research Center.
Main drafters of this Standard. Xiao Chengwei, Zhao Jingwei, Wang Fang,
Meng Xiangfeng.
Specification and dimension of
traction battery for electric vehicles
1 Scope
This Standard specifies the specification and dimension of monomer and
module of metal hydride nickel traction battery and lithium-ion traction battery
This Standard is applicable to monomer and module of metal hydride nickel
traction battery and lithium-ion traction battery for electric vehicles.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
GB/T 7149 Nomenclature for batteries and battery packs containing
alkaline or other non-acidic electrolytes
GB/T 2900.41 Electrotechnical terminology - Primary and secondary cells
and batteries (IEC 60050(482), IDT)
3 Storage battery type
The storage battery type should comply with the provisions of GB/T 7169.
4 Specification and dimension of storage battery
4.1 Metal hydride nickel - hydrogen storage battery
The structure of monomer of metal hydride nickel traction battery is shown as
|